9A-100009371 Sensia Nuflo Liquid Tubine Flow Meter Fig 1502 Union

描述

9A-100009371 Sensia Nuflo Liquid Tubine Flow Meter Fig 1502 Union

Features:

The NUFLO” 1502 WECO” union liquid turbine flow meter incorporates a tungsten-carbide shaft and bearings to withstand the rugged conditions of the oilfield environment, Over the vears, this flow meter has earnec a reputation for withstanding severe punishment while maintaining operational and measurement integrity, WEcO union turbine flow meters indicate flow rate and measure total throughput of a liquid line.luben@youlongpetro.com,whatsapp+8615972752793
As liquid flows through the meter and over the rotor the rotor turns at a speed that is directly proportional to the flow rate. A magnetic pickup senses the rotor blades as they pass and generates an electrica (sine wave) signal. Then, these electrical pulses are transmitted to the flow measurement readout equipment. Optional rotor configurations and/or finishes allow erosive or corrosive fluids such as mud or cement slurries and acids. The meter should be flushed with clean water following the use of any erosive or corrosive fluids.

Specifications:
Accuracy:
± 1.0% Standard Grade
Repeatability:
士0.05%
End Connections:
2″, 3″, 4″ 1502 WECO Union
(10K sour service, or 15K sweet service)
3″ 2002 WECO Union
(20K sweet service)
x 2 for local and remote monitoring
Magnetic Pickups:
Temperature Range (magnetic pickup):
Standard -67°F to 250° F
(-55°C to 121°C)
Medium -67° F to 450° F
(-55°Cto 232°C) luben@youlongpetro.com
(requires high-temperature magnetic pickup)
Mating Output connection:
AN3106A-10SL-45
Compliances:
CSA Certified Hazardous Locations
Class l, Group A,B,C,D
CE-marked for Pressure Equipment
Directive (PED)

Applications:

High-pressure water injection trials
Scale inhibitor treatments
Well cleanouts with coil tubing
Tubing valve opening/closing
ud/cementing operations (displacement volume monitoring)
Flowback of treatment fluids

Materials of Construction:

Meter Body: A286 stainless steel
Meter Vanes:316L stainless steel
Rotor shaft and Bearings:Tungsten carbide
Union Nut:Carbon steel
Magnetic Pickup Receptacle:316L stainless steel

Meter Options:

Binderless carbide shaft for enhanced corrosion resistance to selected chemicals.luben@youlongpetro.com
Silver brazed shaft to withstand temperatures to 450°F(232° C) and chemicals that attack bearing bonding materials
Nickel-plated rotors for enhanced corrosion resistance to selected chemicals (especially acids that corrode ferrous materials)
Modified rotors for cement slurry or mud applications.whatsapp+8615972752793

Benefits:

Rugged enough to withstand continual rig up/down
Accurate and repeatable measurement.luben@youlongpetro.com
Economical solution for turbine flow meter applications
WECO union for quick installation
Minimum maintenance.whatsapp+8615972752793
Long service life, even in severe applications

Installation:

The meter should be installed with the arrow on the meter body corresponding to flow direction of the line
A length of straight pipe -usually a pup joint of 2″, 3″ or 4′ 1502 treating iron – must be installed upstream and downstream of the flow meter
Valves or chokes should be located downstream of the flow meter